CALL US NOW
SureLock Densifiers
AmeriPolish – 1 gallon & 5 gallons
Densifies and colors concrete preliminary to diamond polishing, to obtain a smooth, reflective surface on floor slabs and other concrete products. It increases sheen, abrasion resistance, water resistance, and stain resistance of exposed concrete finishes.
- Acts to lock color into concrete matrix, minimizing color migration or diffusion
- Chemically bonds to other components of Surelock Color System
- Improves surface resistance to liquid penetration and stains
- Improves abrasion resistance for better wear characteristics
- Minimizes dusting for healthier indoor air quality (IAQ)
- Prepares surface for high gloss diamond polishing
- Penetrates slab surface to deliver solids content deeper into surface layer than conventional lithium silicates
- Reduces labor and time required for installation compared to some densifiers, because it is spray-applied, does not require labor intensive scrubbing-in or gel formation, is fast reacting, requires minimal dwell time, and does not require scrubbing-off or wet caustic residue disposal
- Does not leave excess mineral salts (whiting) on surface unless over-applied
- May be applied to new or existing concrete
- Simple one-step application
- Cures quickly; traffic or other finishing operations can usually be resumed one hour after application
- Contains UV stabilizers to help protect colorants in concrete
- Does not contribute to surface crazing
- Helps combat efflorescence and alkali silica reaction (ASR)
- Odorless, non-flammable, VOC compliant (< 40g/L)
Coverage varies depending on concrete mixture, porosity, and moisture content and on ambient conditions. Use test areas to determine appropriate application procedure and adjust application rate. As a starting point to determine coverage: 500-700 sf / gal (12-17m2 / L)
There are no reviews yet.